London Generator Project coolant and fuel system install

Generator Installations were asked to install a full generatro cooland and fuel system installation at a large commercial development in London

IMG_0690 IMG_0653

IMG_0669

The specification called for a complete the coolant system of 400m of 3″ coolant lines, 200m fuel system. including; 25mm in 50mm pipe in pipe transfer lines, 100mm single skin welded vent lines, ...

Continue Reading →
0

Generator Installation in Greenwich

Generator Installations have installed a generator at a large residential development in London.
The specification called for a full installation starting with installing an enclosure on the generator. The next task was to install a fill point cabinet in a suitable location and make all connections between the cabinet and the generator, including pipe in pipe fuel lines and power and control cables and a bespoke fuel system panel and breaker.

IMG_0957

Continue Reading →
0

Double skinned tank install in Milton Keynes

Generator Installations were asked to supply and install a 2500 litre double skinned fuel tank for a large retail distribution centre in Milton Keynes. The tank was delivered with intergral fill point, gauges and overfill alarm.

IMG_1337 IMG_1339

Once the tank was offloaded and positioned, connections had to be made between the tank and the generator containers, this was achieved using a ...

Continue Reading →
0

Pipe in pipe jacketed pipework / double skin pipework

Generator installations have many years experience installing pipe in pipe jacketed pipework also known as double skin pipework.

We have Zurich certified welding procedures for mild steel and stainless steel pipework, our coded welders/fitters install pipe in pipe jacketed pipework in mild steel for the generator fuel lines.

We have qualified engineers to install Brugg secon x and FSR pipework and UPP Durapipe depending on the application and the clients specification.

Please call us today for a free quotation.

Continue Reading →
0