Fuel System Automatic Filling System – London

Generator installations asked  to manufacture and install a solution for filling a generator fuel tank from 200 litre barrels. This included a system to pump the fuel, a control panel, informing the user on the current state of the remote fuel tank and fully welded pipe in pipe transfer pipework between the fill point cabinet and bunded tank.

The result was a solution that would be easy to use and understand for any operative on site. Please see some photos of the installation ...

Continue Reading →
0

Generator Exhaust System Installation – London

As part of a full installation, Generator Installations were asked to install a large exhaust silencer goal post steel frame. Our skilled engineers and plant movement specialists carried out this task safely and on time.

The modular steel support system was fabricated off site and assembled in position. The steel structure was designed to fully support the exhaust silencers but also to ensure that there was adequate space below to later position and install the Generator.

During the steel erecting and silencer lifting ...

Continue Reading →
0

Generator Fuel System Installation In The Midlands

Generator Installations have successfully completed an installation of the fuel system, including a 3500 litre bunded fuel tank, for a newly installed generator. The  installation was compliant will all relevant regulations.

As with all the fuel systems we install, safety is foremost in our minds, to this end a we used a number of active and passive fuel safety systems on this installation, including:

  • Drop weight fire valves, with mercury tilt switch and fusible link
  • Overfill prevention valve
  • Fuel gauges with over fill and bund ...
Continue Reading →
0

Fuel System Installation

23

Generator Installations were tasked with installing an 8000 litre fuel tank into the basement of an existing, occupied development. Initially we was asked to complete a site build 8000 litre double skin fuel tank as access was very limited at site, however after a survey Generator Installations designed an innovative solution, installing four, smaller tanks equalling 8000 litre capacity, balanced through a sealed ...

Continue Reading →
0

Fuel Pipework Pipe in Pipe jacked double skin bunded pipework

Fuel systems must be protected against leaks that can cause severe environmental damage. Due to building regulations fully welded ‘pipe in pipe’ systems are common place in many installations, wherever fuel must be transported through a building and no bunding is present. Pipe in Pipe solves this problem without the need for any structural or cosmetic alterations to the existing building. The inner pipe acts as the channel in which the fuel will flow and the larger, outer pipe, acts a ...

Continue Reading →
0

Friends of Wisdom Hospice Charity Fund Raising Event

Generator Installations helped raise an incredible £5,614.53 for the Friends of Wisdom Hospice. The money was raised at a fund raising event in memory of Stuart China, the father of company director Richard China.

The hospice have advised the money will pay the salary of a specialist palliative care nurse for 3 months.

A special thanks to Emma Martin for managing the fund raising event.

Below is a photo of the cheque being handed over to the Hospice who was extremely grateful.

Continue Reading →

0

Generator Installation in Bath

Generator Installations wasasked to carry out a generator and fuel system installation in Bath. Generator Installations provided a bespoke installation of the generator, acoustic attenuation, exhaust silencer and fuel system.

All of the pipe work and silencer supports wasdesigned and custom made off site to ensure quick and easy installation, minimising any possible site down time.

Bath 2

The fully designed and installed fuel system includes a bulk fuel storage tank with level ...

Continue Reading →
0

London Generator Project coolant and fuel system install

Generator Installations were asked to install a full generatro cooland and fuel system installation at a large commercial development in London

IMG_0690 IMG_0653

IMG_0669

The specification called for a complete the coolant system of 400m of 3″ coolant lines, 200m fuel system. including; 25mm in 50mm pipe in pipe transfer lines, 100mm single skin welded vent lines, ...

Continue Reading →
0

Generator Installation in Greenwich

Generator Installations have installed a generator at a large residential development in London.
The specification called for a full installation starting with installing an enclosure on the generator. The next task was to install a fill point cabinet in a suitable location and make all connections between the cabinet and the generator, including pipe in pipe fuel lines and power and control cables and a bespoke fuel system panel and breaker.

IMG_0957

Continue Reading →
0
Page 1 of 6 12345...»